This post is sponsored by Cricut and contains affiliate links.
My unboxing of & guide to using the Cricut Explore 3
I am super excited to be sharing my review of the brand new Cricut Explore 3! I own the Cricut Explore Air 2, the Cricut Maker, and the Cricut Joy. So why not add a fourth machine to the lineup? 🙂
When I first heard Cricut was planning to roll out next-generation machines for both the Explore series and the Maker series, I wondered what the improvements could possibly be. I would say I use my Explore Air 2 the most out of all of my machines, so I decided to review the Explore 3 and deep dive on it!
- What do I get with a Cricut Explore 3?
- What does the Cricut Explore 3 do?
- What tools is the Cricut Explore 3 is compatible with?
- Explore Air 2 vs. Explore 3
- What are Smart Materials?
- What is the machine’s maximum cut size?
- Why do Smart Materials have a minimum cut size?
- Can I use regular materials or other brands without a mat?
- My first Cricut Explore 3 project
- Other FAQs answered
What do I get with a Cricut Explore 3?
- A machine
- Premium fine-point blade and blade housing already installed in the B clamp
- Accessory adapter installed in the A clamp for pens, etc.
- Power adapter, cord, USB cable
- Quick start guide
- Materials for test cuts
What does the Cricut Explore 3 do?
It cuts, draws, scores, and more with speed and precision. And works with 6 different tools for cutting and embellishing over 100 materials. These materials include vinyl, iron-on, cardstock, glitter paper, cork, bonded fabric, and much more!
In addition to all of these things, it can cut without a mat if you’re using Cricut’s new line of Smart Materials specifically designed for mat-less cutting on the Explore 3! And it cuts much faster than the Explore Air 2 does. Basically it does everything the Explore Air 2 does, plus more.
What tools is the Cricut Explore 3 is compatible with?
The Cricut Explore 3 is compatible with the 6 tools listed below. Although the smart vinyl roll holder is super handy, I don’t really consider it a tool. But Cricut does, so I am including it. (See more on tool compatibility on Cricut’s website.)
- Premium fine-point blade
- Deep-point blade
- Bonded fabric blade
- Scoring stylus
- Foil transfer tool
- Roll holder for smart vinyl
Explore Air 2 vs. Explore 3
- The Explore 3 can print-then-cut on white and colored paper; the Explore Air 2 can only print-then-cut on white paper.
- Like the Maker, the Explore 3 has integrated cutting settings. The Explore Air 2 has a dial you have to change on the machine.
- The Explore 3 has an approximately 2x faster cutting speed compared to the Explore Air 2 using fast mode. There is no fast mode on the Explore 3 because it’s fast out of the box.
- And finally…the Explore 3 has mat-less cutting capability when using Cricut’s Smart Materials! Just like the Cricut Joy. (Read all about my review of the Joy’s capabilities.)
Let’s talk about Smart Materials…what are they?
Cricut first rolled out Smart Materials on the Joy machine last year. Before Smart Materials, you’d need to put your material on an adhesive mat and load that into a machine. The introduction of Smart Materials means mat-less cutting.
You heard me! Smart Materials don’t use mats. They are designed to be sturdy enough to load directly into the machine, which saves time, money, and honestly—mat frustration. Smart Materials for the Explore 3/Maker 3 currently include vinyl, iron-on, and sticker paper cardstock.
A big advantage to not needing a mat means that you can cut more at once—and you can make longer cuts. The maximum cut size on the Explore Air 2 was 11.5 in x 11.5 in (29.2 cm x 29.2 cm) with a 12×12 mat and 11.5 in x 23.5 in (29.2 cm x 59.6 cm) on a 12×24 mat.
If you are cutting with a mat on the Explore 3, it uses the same mats as the Explore Air 2 uses. So the max cuts sizes are the exact same. Howeverrrrr…the mat-less Smart Materials really ups the size of what you can cut for iron-on and vinyl!
What is the machine’s maximum cut size?
Here are the details on the maximum sizes you can cut when using the Explore 3/Maker 3 Smart Materials:
- Vinyl: 11.7 in x 12 ft (29.7 cm x 3.6 m)
- Iron-On: 11.7 in x 4 ft (29.7 cm x 1.2 m)
- Paper Sticker Cardstock: 11.7 in x 11.2 in (29.7 cm x 28.4 cm)
Keep in mind that this is the maximum size of a cut. Not an entire project. The Cricut Explore 3 can support a roll of vinyl up to 75 feet long. So that means if you wanted to cut a 12-foot-long squiggly line shape for a wall decal, you could do that.
You could then repeat that cut 6 times since the roll is 75 feet long, leaving you with 6 squiggly line shapes at the end of your cut. You’d have a little leftover vinyl since 75 feet divided by 12 feet is 6.25 feet.
Iron-on has a shorter continuous cutting capability at 4 feet, but I’m thinking the longer cuts would be mostly for vinyl anyways. Decals, signs, etc.
The new Cricut Roll Holder, one of the 6 accessories the Explore 3 is compatible with but that is purchased separately, is super helpful with longer mat-less cuts. It clicks on and helps keep the material aligned properly. But it isn’t required.
Why do Smart Materials have a minimum cut size?
Unfortunately there is also a minimum cut size when using Smart Materials. You’ll need material that is at least 13 in (the full width) of the roll x 6 in long to cut without a mat. And there’s a reason for this.
You don’t have to measure and cut Smart Materials before loading them into the machine. Design Space will tell you how much material you need, and then when you load them, it will pull the Smart Materials allllllll the way in and back out to ensure you have enough.
If you haven’t loaded enough material, Design Space will tell you that you need to. For this reason, Cricut recommends leaving your entire roll intact and then cutting your project off after your machine cuts everything out.
Can I use regular materials or other brands without a mat?
Cricut does not recommend using non-Smart materials without a mat. And that includes Cricut brand materials. Again—you can use other brands and non-Smart Cricut materials on the new machines, you just need to use a mat.
I want to make that super clear because I have seen a few people saying things like, “my old materials are now worthless with this new machine!” This is not true at all. Much like the Joy, the Explore 3 and Maker 3 both have mat and mat-less cutting capabilities.
My first Cricut Explore 3 project!
I did a quick first project (you can see a Reel of it on Instagram) using the Explore 3, roller holder, and black permanent vinyl. First I grabbed a piece of scrap wood from the garage—a 1″ dowel. I cut a few pieces, sanded the edges smooth, and glued magnets on.
And then I cut out a bunch of black vinyl leaves! It was super fast and easy to do, especially without a mat! After I popped the leaves on the blank wooden magnets, I was done!
For more Cricut, see my Cricut Joy Xtra Review, my Cricut Maker 3 Review, and my article What is the Cricut Venture?
Other FAQs answered
Here are a few other tidbits of info you might want to know about the Cricut Explore 3 before you get started working with one.
How do I set up my machine and activate Bluetooth?
Go to Cricut.com/setup to set your new machine up. Ensure it is on and that you have Bluetooth enabled on your computer or device. Bluetooth connectivity is now standard on all Cricut machines, despite them dropping “Air” from the Explore’s name!
Are the Cricut power cords interchangeable?
Some of them are, but the Explore 3 cord is not. It comes with a new 90-degree connector that ensures you can tuck it away when cutting long cuts on Smart Materials.
How is it powered?
The Explore 3 machine is powered by a combination of servo and stepper motors. I have literally no knowledge on this topic, but I wanted to learn more. Here are a few quick definitions.
Servo motors are devices that rotate and push parts of a machine with precision. Stepper motors are used to precisely position a motor (e.g., hard drives, robotics, antennas, etc.) Combined, they make the Cricut magic happen.
How do I turn on fast mode?
You don’t! There is no fast mode. The Cricut Explore 3 is already up to 2x faster than the Cricut Explore Air 2 when it was on fast mode. The Explore 3 is already optimized for fast precision cutting on Smart Materials.
Pin this!
Brittany is a seasoned DIY home and garden expert, running a creative brand since 2014 that inspires others with approachable plant care guides, woodworking tutorials, and decor projects. She is a certified project manager and has completed extensive coursework in the art and science of growing your own plants. Her work has been recognized by major publications, and she routinely collaborates with fellow DIY industry leaders—but her favorite thing to do is inspire you! Learn more about her here.
Leave a comment