This post will teach you how I ice dyed cotton napkins using Jacquard Procion dye powder in Jet Black.
I was watching “Making It” on NBC a few weeks ago and said to Mike, “I really need to step up my crafting game and learn some more techniques.” He said, “well you aren’t going to do that sitting here watching TV.” (Right, but I had to watch Damask Love, ok?)
So I decided to dive in and try something I have been wanting to try for a while: ice dying. I haven’t had a ton of experience with dying items other than the occasional tie-dye and some minor projects dyed with Rit dye (refreshing old jeans, etc.). I had seen ice-dyed items on Pinterest before and wondering, was this really something that would look good? Could I, someone with pretty much no skills in dying fabric, pull off a cool looking ice dye?
The answer is yes.
Looks cool right? It’s like if tie-dye and shibori had a mashup that required no skill or technique. Really.
Here’s how I did it.
(This post contains affiliate links. You can read more about that here. Thank you!)
- 100% natural fiber reusable napkins (I used 100% cotton)
- Jacquard Procion Dye Power in Jet Black
- Large bowl and cold water
- Any kind of washing soda (also called soda ash), leftover can be used for laundry. It’s in Oxyclean—I immediately recognized the smell and looked it up to see.
- Deep baking pan and aluminum foil
- Cooling rack
- Disposable gloves
- Rags or paper towels for cleanup
A couple of notes before I go over the steps I took.
- It’s extremely difficult to get a true black when dying white. This did turn out more navy than I’d wanted, and it looked even bluer in real life compared to these photos. That’s okay, I still think it looks nice—was just really hoping for a higher contrast black, gray, and white. There are parts of the napkins that look black, which is pretty cool. Those parts must have just gotten more of the dye as it melted.
- You must use a natural fiber fabric if you want to try this technique and maximize how vibrant your color is. 100% cotton is great. You can dye anything using this technique. It doesn’t have to be napkins. I just wanted something smaller, manageable, and practical to try it out. And you can use any color!
- Procion dye is MESSY and STRONG. I covered my workspace and didn’t wear anything that I’d care about getting dye on. I cannot emphasize this enough. A tiny bit of the dye powder is extremely strong, too. So if you even drop a speck on a table and then try to wipe it up with a wet cloth, you’ll have a streak in that color that you’ll have to clean up. 🙂
Ok, here’s how I made my black ice-dye napkins.
Step 1: First I submerged my napkins in a bath of water and washing soda. Washing soda is also called soda ash, which I only discovered after a lot of confusion while looking for the right thing to buy. 🙂 The dye has the ratio of washing soda to water on its instructions, as well as how long you need to soak it. I think it said 15 minutes, and I ended up soaking mine for about 30 minutes because I had a baby to attend to.
The purpose of the washing soda soak is to help the fabric absorb the dye better.
Step 2: Then I lined a baking pan with aluminum foil for easy cleanup and popped my cooling rack in. I wrung out the napkins as best I could (I didn’t rinse them, just wrung out the excess), and then twisted them up. I twisted some more tightly than others to see the difference it would make in the dye’s pattern.
For all of them, I twisted them up like I was wringing out a towel, and then I coiled them up in different directions. Don’t overthink this step…the dye is going to migrate!
Step 3: I put a layer of ice cubes over the coiled-up napkins and sprinkled the Procion Dye over them. I really just guessed at how much I’d need and aimed for a decent layer over the ice cubes.
It looked pretty cool while it started to melt—definitely made for some cool pics. I was hopeful that the napkins would take on a similar pattern to how the dye looked on the ice cubes.
Step 4: After I sprinkled the dye, I let it sit for about 24 hours. This is why the cooling rack part is necessary—if you just let the dye melt through the ice and the napkins sit in a dye bath, they won’t have any pattern. Mine would have just turned solid black on the parts that touched the dye bath.
Here’s how mine looked the next morning. I was disappointed to see how blue they looked, but since the dye bath under the cooling rack looked black, I had high hopes for how the napkins would look rinsed out.
Step 5: This was the worst part. Rinsing the dye out with cold water in the sink until the water ran clear. I would probably not have done this in a white sink, that’s for sure! There was a lot of dye to rinse out.
But after a while, the water started looking clear, so I threw a bit of detergent in and washed them for the last rinse. Then I threw them in the dryer to see how they’d look dry.
They verdict? I think they look pretty cool.
The black may not have taken as a pure black/gray, but I still think the navy looks nice. I knew getting a pure black would be difficult and that navy or purple was a definite possibility. Luckily I still like both colors 😉 You can also definitely tell a difference between the napkins I twisted tightly (they have more white space) and the napkins I twisted loosely (less white space).
What do you think? I’m going to call this one a success. New skill in the books!
Like this? PIN IT!