This post shares my review of Aspect Peel & Stick glass tiles in Frost, including tips on installation. Peel and stick tile is a great way to easily give a facelift to a space in your home. This post is sponsored by Aspect Peel & Stick Tiles. That means they sent me the tiles to use in my home, but I was not paid to write this post. This post also contains affiliate links. You can read more about that here. I hope you enjoy my review!!
Earlier this spring when I emerged from my mini blogging retirement, I said I wanted to do more product reviews. I have done…exactly one. And that was the initial product review post. Oops. (To be fair, there are more in the pipeline.)
My Review of Aspect Peel & Stick Tiles
I want the majority of my review posts to be focused on products I find, use, love, and want to share with you. When I got the chance to try out Aspect Peel & Stick backsplash decorative tiles, I was pretty excited. We have a really small backsplash area in our kitchen that I thought the Aspect Peel & Stick tiles would be perfect for—and, if I’m being honest, I didn’t really want to mess with mixing up mortar and grout for such a small space. I just wanted to add a decorative element that wasn’t paint.
Aspect Peel & Stick tiles come in a variety of colors and finishes including metal, stone, glass, and wood. I ended up choosing the 3×6 Aspect Peel & Stick glass in Frost. (Scroll down on this page to view all available colors.) The color is described online as a “snowy, white color” that “makes a clean, refreshing addition to any space.” I’d say this is mostly true. As with any color—especially on reflective surfaces—there can be some variation in color. My kitchen is pretty dark, as are the cabinets—and the Frost tiles look like a light gray. (This is fine with me, just a reminder to keep in mind that colors can vary based on the lighting conditions.)
I have worked with glass tile before and knew it to be a bit of a pain. It’s fragile and can crack easily if you aren’t using the right tools. But it looks so freaking good. Luckily, there is an extremely detailed glass tile installation guide (as well as installation guides for the other finishes) available online. I highly recommend reading it carefully before getting started. It answers pretty much any question you could have and outlines all of the safety precautions you need to take.
There are also helpful videos, like this one:
Overview of the steps I took to install our Aspect Peel & Stick glass:
(Always follow the manufacturer’s instructions and wear proper hand, eye, and ear (if using a tile saw) protection when working with tiles and glass. Read my full disclaimer here. Thank you!)
The installation guide recommends two different installation approaches depending on your situation. The first is to peel and stick the tiles directly to the wall, which requires a bit of prep work beforehand to get the surface ready. The second is to add a bit of polyurethane adhesive to the back of each tile, which requires no prep work to the wall beforehand. Since I had some polyurethane adhesive in the garage, I went with the second option. It only added a few extra seconds per tile, and the sticky backs kept each tile firmly in place as the adhesive dried.
I sketched out the design I wanted until settling on a simple stacked subway design. Then I measured and marked the center points and calculated where I’d need to make cuts. I decided to start at the bottom left. Start with whatever makes the most sense for your layout.
Next I gathered all of the supplies we needed: a small glass cutter, gloves, measuring tape, a marker, a level, and the polyurethane adhesive (Aspect recommends Loctite). Note: I couldn’t use the small glass cutter for the trickier cuts around the outlets and the inner corners of the cabinets—I needed a tile saw with a diamond blade for that. My dad cut those pieces for me since he has a tile saw. (Dad, you’re the BEST!) A note of caution on cutting glass tile with a diamond blade—cut very slowly! If you don’t have a tile saw, you can probably rent one. You won’t need a tile saw if all of your cuts are straight cuts like I’ve marked below:
If you’ve never working with cutting glass before, it’s really easy using a simple scoring tool. Here’s a nifty video showing you exactly how it works.
3. Peel & Stick.
And, in my case, glue. Refer to the installation guide for whether or not you should just peel and stick or add adhesive. This admittedly took longer than I thought it would because I was double- and triple-checking measurements and positioning every 5 seconds. I probably could have just drawn a straight line all the way across or used a chalk line like the instructions suggested…that would have been smart. But I am not smart, so I did it the tedious way: with a measuring tape, a pencil, and a level.
4. Map Precision Cuts.
After I’d laid all of the easy cuts (the ones that didn’t need the tile saw) and the whole pieces, I called it a day. Then I sat on the project for a few weeks because I had to wait for my super busy dad to make the precision cuts for me with his tile saw. And we got out-of-town visitors, and my kitchen looked like this for a weekend:
5. Install Outlet Extenders/Mud Rings.
I can’t tell you if you’ll need outlet extenders because I don’t know what you’re working with. But if you do, it’s a super easy process. We just picked up cheap (under $1) plastic mud rings from Home Depot (very similar to these), turned the power off at the breaker (VERY IMPORTANT), double-checked to make sure the power was actually off (also very important), and installed. I used this straightforward YouTube tutorial to guide me through the process:
Here’s the before and after. What do you think?
Oh! And as you can see in the previous pic, I also took the opportunity to paint the island we had painted black when we moved in. I love me some black paint, but it just wasn’t working here. It was too dark and showed every tiny little spec of dust and scuff.
I am extremely pleased with the tile and think it is an awesome facelift for our kitchen. I love how the reflection off of the glass tile also makes the area seem a bit brighter, too, which is great since the windows are on either end of the house.
You can check out Aspect Peel & Stick’s backsplash galleries, and when you’re ready to order, head over to their DIY Décor Store, which is also a great resource for installation guides, FAQs, tips, and more. Aspect Peel & Stick is also available at Home Depot, Lowes, and Menards.
Like this? PIN IT!